High Security Doors - Model 'D' Two Point Locking Devices
Features
The Rivers Model 'D' Lock is a high security multi-point locking device that can be mounted vertically or horizontally to any solid core door. The Model 'D' lock comes in 6 configurations (Series 1 to 6) as shown in the table below. All configurations utilise two 32mm x 1 Omm chrome plated steel locking bars, that throw 45mm to each locking point (90mm total extension). The standard Model 'D' lock body is adjustable to suit door widths from 760mm up to 960mm. For door widths from 961 to 1220mm our'long body'must be specified. Locks to suit door widths under 760 mm or over 1220mm wide or locks required for vertical mounting are made to order. All Rivers Model 'D'Iock configurations (with the exception of Series 3) are fitted with an internal lever handle that rotates downward through ninety degrees to disengage the locking bars. As a result of this feature the lock complies with the Building Code of Australia for use in emergency egress applications. The locks are supplied with a 201 cylinder and they can be master keyed by locksmiths. Other options include internal cylinder, a 'self-latching' function and a 'hold open'function.
Applications
Rivers Model 'D' Iocks are recommended for use in financial institutions, schools, government buildings, communication huts, shopping centres, council amenities buildings, cash rooms, computer rooms, wharehouses, record storage rooms, retail outlets, rear entry doors and fire exists. In fact, the Rivers Model 'D' lock is ideal for any application where security is the utmost priority. For best security and protection Rivers locks should be used in conjunction with Rivers high security door units (comprising a Rivers door and door frame assembly).
Hardware
Hardware, where applicable, includes brass chrome plated lever handle(s), stainless steel nut plates, locking bar keepers, a 201 cylinder and stainless steel cylinder shield with anti-drill disk.
Finishes
The standard Model 'D' Lock body is powder coated Dulux'Hammertone Black', with the exception of the Model 'D' Series 6 lock which is powder coated Dulux 'Anodic Silver'. Special colours are available upon request.
Installation
Rivers Model 'D' Locks are surface mounted to the inside face of solid core doors. For an'opening out'door the lock is fixed using nut plates & threaded rod, while the locking bars extend through slots cut into the doorjamb. 'Opening in' doors utilise coach bolts to secure the lock to the door leaf. Nut plates & threaded rod is used to retain the locking bar keepers to the inside face of the door frame. Rivers can provide experienced installers to correctly fit Model 'D' two point locks ensuring security and reliable service. Locks can be fitted by trained locksmiths. Refer to fitting instructions provided with the lock.
